直筒洗衣机怎么拆开清洗图解

直筒洗衣机怎么拆开清洗图解

直筒洗衣机清洗的步骤大致相同 for different brands. Here's a general guide on how to disassemble and clean a straight-tube washing machine:

Power Off & Cover Removal: Start by disconnecting the power and removing the washing machine's cover. This will give you access to the internal parts for cleaning.

Removing Screws & Parts: Depending on the model, you may need to remove screws securing the inner workings. Some models may require the use of a screwdriver, while others may need a扳手。

Inner Parts Cleaning: After removing the screws, you can take out the inner working parts, such as the agitator or inner drum, for cleaning. Be sure to clean both the inner and outer surfaces of these parts。

Soaking & Brushing: Soak the removed parts in a solution of water and detergent to loosen dirt and grime. Use a brush or sponge to scrub away built-up grime。

Rinsing & Reassembly: Rinse the cleaned parts with clean water and then reassemble the washing machine, making sure all screws and other fasteners are tightened down securely。

Final Cleaning: once the machine is back together, give the exterior a good cleaning using a damp cloth and detergent, being careful not to get water inside any electrical components。

Testing: Plug in the washing machine, add water, and perform a test cycle to ensure everything is functioning properly before putting it back into regular use。

Note: Always unplug the washing machine before starting any cleaning or maintenance procedure to ensure electrical safety。

直筒洗衣机怎么拆开清洗图解

直筒洗衣机拆开清洗图解如下：

洗衣机：美的滚筒洗衣机V11D

工具：十字改刀、刷子、洗衣机清洗剂

1、首先用十字改刀将洗衣机上面的螺丝取下，如下图所示。

2、然后将洗衣机控制面板拿下后，可以看到里面有几颗螺丝，用十字改刀取下，如下图所示。

3、接着取下整体塑料盖板，将里的赃物清洁一下，如下图所示。

4、然后将滚筒上面的密封圆形塑料挡圈取下，用一把长刷子清洁滚筒壁面，慢慢刷洗将脏污刷出来，如下图所示。

5、最后向上轻轻提一下，就可以将内桶取下来了，用水加清洗剂冲洗干净即可。